Why do air compressor stations need joint control ??
1. The fault is not handled in a timely manner
When the equipment in the computer room fails, it is difficult to understand the situation at the first time, and there is a lag in information understanding, which often affects the production line.
2. The utilization rate of air compressor is not uniform
The use time of the standby machine and the main machine in the equipment room is uneven, resulting in low or overuse of some machines, which seriously affects the service life of the machine.
3. Large maintenance personnel input
For high pressure conditions, on-site inspection personnel are required.
4. Serious waste of energy
Different machine load rate distribution is uneven, can not make the air compressor as far as possible to run in the best load range, the whole station energy consumption load is high.
JAGUAR Intelligent Control Functions:
1.Timing switch, timing pressure switch
Start and stop the air compressor equipment in the whole station at a customized time according to the production plan.
Switch the target pressure of different whole station at different time points according to the demand.
2.Start the guest machine in case of failure
When the equipment such as the air compressor fails, the joint control system will send an alarm signal, and at the same time,
it will issue a command to start the standby air compressor , so that the pipeline pressure is smooth and the impact on the
production line in the equipment room is minimized.
3.Monitor and report the whole station
The running status of all devices in the room will be displayed on the control interface of the linked control system,
and the information about device startup, running, and fault will be displayed in the event report.
Customers can periodically export printed event reports as required.
4.Cloud control
The operating data of the air compressor station is uploaded to the cloud in real time, and customers can log in
through mobile APP or website account to remotely view the operating conditions of the room in real time.
5.Intelligent electric meter monitor air compressor energy consumption
Each set of air compressor will be equipped with a smart meter and the data statistics in the control interface to form a chart,
24-hour statistics of air compressor and post-processing equipment electricity consumption,
statistical data will also form a report according to customer needs to print out.
6.Flowmeter statistics gas usage
The main pipe of the air compressor system is equipped with a flowmeter to
count the gas production of the air compressor station in real time.
