Knowledge

How to choose the right air compressor to achieve both cost-effectiveness and energy conservation

Jaguar Intelligent Control improves the utilization efficiency of air compressor stations

Successfully obtain CE certification

Vortex flowmeter installation precautions

It is a value indicating the degree of sealing of electrical equipment such as dustproof, foreign body, waterproof, etc., expressed by IPxx (xx is two Arabic numerals)

Keep the lubricating oil in the oil sump within the range of the scale. Before operating the air compressor, check that the amount of oil in the lubricator should not be lower than

When installing the air compressor, it is necessary to have a wide and well-lit area to facilitate operation and maintenance.

This part changes according to the change of working conditions. If the gas consumption is stable and matches the air compressor's exhaust volume well, then this part has a small l

The oil filter must be replaced in the first 300-500 hours of operation, the second time it is replaced after 2000 hours of use, and thereafter it will be replaced every 2000 hours

Remember! Do not use hard objects such as iron brushes to scrape off dirt to avoid damaging the surface of the radiator.

Replacing a piston compressor with a screw compressor should start with the old machine's real problem. Noise, frequent start-stop cycles, unstable pressure, longer production

A stable factory load does not always need a PM VSD compressor. If the production line runs close to full air demand for long hours, a fixed speed screw compressor can still be the