The safety valve has been adjusted before the machine leaves the factory. The supplier does not encourage users to adjust the safety valve without permission. If adjustment is indeed necessary, it should be carried out under the guidance of the local labor safety department or supplier maintenance personnel, so as not to cause adverse consequences.
For general users, provide some compressor maintenance suggestions, users can refer to the implementation.
① Weekly:
A. Check the unit for abnormal sounds and leaks
B Check whether the meter reading is correct
C. Check whether the temperature display is normal.
② Monthly:
A. Check if there is any rust or looseness in the machine, if there is rust, remove the rust and oil or paint, tighten the looseness
B. Drain the condensate.
③ Every three months:
A. Remove the dust on the outer surface of the cooler and the fan cover and fan blades
B. Fill lubricating oil on the motor bearings
C. Check the hose for aging and cracking
D. Check electrical components and clean the electrical control box.
